Remove Front Door Panel 2011 Focus

There is also a screw located at the door lever the device you use to open the door from the inside.

Remove front door panel 2011 focus.

After you have all the covers and screws off pull up on the door panel and it should come loose. Flat head screw driver. Look for a small hole in the door pull handle cover. This product is made of high quality materials to serve you for years to come.

Set the screw aside in a safe place. Pry off the trim piece inside the door handle with a flat blade screwdriver. Remove the t20 torx screw inside the door handle. Set the cover and screw aside in a safe place.

Removing the door panel 0 39 pry off the triangle panel in the corner by hand. Remove the screw behind the cover with the torx t25 screwdriver by turning it counter clockwise. Insert a small screw driver into the hole to pry the cover off. Exterior door handles by dorman.

After this slide your door panel up to remove it. Pull the door latch handle and remove the screw that is behind it. With the front doors you need to squeeze the two fat tabs on the door lock unlock module from the back of the panel. Disconnect the mirror wiring harness.

Remove the two screws behind the cover. You can now remove the screws that are beneath the cover. Slide it out on an angle and disconnect that harness. Then move to the outer edge of the door panel and pry out the vinyl rubber trim panel near the top with the small flathead screwdriver.

Philips head screw driver. Removing the door panel disconnect the battery s negative black cable before you do anything else. To unclip the cover trim on the door s pull handle insert a screwdriver into the hole below the cover and twist.